Wednesday, December 13, 2017

course outline

Course as is
week 1-5 3d printing
week 6 Engineering as a whole
week 7-8 analytics
week 9-12 LEGO
week 13-14 Christmas lights
week 15 Final

Course Redone
week 1-2 CAD (here we would learn basic design and how to use computer drawing programs)
week 3-5 3d printing
week 6-7 Engineering disciplines ( go more in depth on engineers and what they do, help us choose one to go into)
week 8-10 Analytics
week 11-14 LEGO/coding/Christmas lights (learn different types of coding from the Christmas lights and LEGOs)
week 15 Final

Friday, December 8, 2017

Gabe module 13 Doc

https://docs.google.com/document/d/15QqSRg-Jz1roEDDsSiy--DMhGHcA_VvYgJ6ajDo0t8Y/edit?usp=sharing

Wednesday, November 29, 2017

Nick and Gabe

To get an LED Connected you can't just simply connect it and you're good. First you connect the long leg of the LED to the alligator clip. Then take a 220 resister and connect it to the other side of the clip. Then plug the short leg into the GND port of the board and the resister to PWM 10. In the program change the where ever it says Builtin LED to the number 10. Verify, Upload, and you are done!

Module 13 (such/tischler)

to get the LED to light up from the set, you must attach the LED light and resistor to each ends of a wire, When attaching the wire to the light, you must attach it to the longer part. From there you must put the resistor into port 10 on the board and put the bulb in GND, which stands for ground. Now you must change the code from the power going to the build in LED to port 10. So where it says LED_BUILDIN, change it to 10. Verify the program and upload it to the board.


_______________________________________________

One Port


Two Separate Ports


Christmas Tree

Nick Google Doc Demo

https://docs.google.com/document/d/1Tq5sYoNqeH5IWSk5AlnaMBFh5-U0BkGd5nZzps6xD3I/edit?usp=sharing

Shawn Google Doc

https://docs.google.com/document/d/1muu9BM5zOXuQO8Z2eOtZOpY8cSPHi-jBAVcEpc6etxk/edit?usp=sharing

A.Such Google Doc M13

https://docs.google.com/document/d/13HDC15z-zbY70x5e9mk2q4AyQjFIAfrNbe7wnzz_2Ow/edit?usp=sharing

Wednesday, November 15, 2017

Post Robot Fight


Our robot only did not do good because we made a mistake in our code right before we fought. We fixed the code when we had one game left and destroyed the opposition. Our bot really would have won the championship if it did not just drive off the dohyo because of the faulty code. 

The games that our bot won, it went under the enemy robot and picked it up and pushed it off the dohyo. Our ramp was really well made and it worked well. But half the time, our bot just drove off the course by itself and that was why we did not see success at first. 

Why Our Bot Will Win



Our bot will win because our program is well thought out and well executed. Also, we have a ramp that can push and get under other robots and force them off the dohyo. The sensors are perfectly placed on the robot in order to maximize efficiency and stay on the dohyo. Our robot is also not too heavy or clunky. It is small and speedy, yet powerful. 

Wednesday, November 8, 2017

Robot Design and Strategy

Our design consists of the IR sensor in the front scanning for the other robot. Our touch sensor will be in the back so the robot will be able to react if the other robot comes behind ours. The light sensor will also be in the back incase our robot is being pushed back, it will see the white line and be able to push back.
The basic strategy is to quickly get out of the way right in the beginning while some robots will attack right at the start. Once we dodge we will have the robot scanning with the IR sensor to find and attack the other robot. We also have a ramp attached to the front to lift up opposing robots so they have less traction to push back on us.

Nick https://docs.google.com/document/d/1ZKx_MGi1tpmG4PrL7foEqiSSa7kUlU6utWxvhEuKzBY/edit?usp=sharing

Shawn
https://docs.google.com/document/d/131PrJ_BXcXpJsQxNg6-8VghmNwsa0R1ac-Li_YAeoPc/edit

AJ
https://docs.google.com/document/d/1ExMLaL6CLDuzlR5X-StPDmr3jVva_jZSNnqECKzsBiM/edit?usp=sharing_eip&ts=5a034055

Gabe
https://docs.google.com/document/d/17hYUQVUkQGan0jG6KPt9n8oWaYam88PUTliuUCbwzFo/edit?usp=sharing



Tuesday, November 7, 2017

Move Steering with Touch Sensor
This code will be tested in the next class to test the touch sensor and steering when the sensor is activated.
Touch Sensor Intro
Color Sensor 

Tuesday, October 31, 2017

The Blocks

Steering and moving is an important aspect to take into account especially if the robot will have to fight other robots. Lucky the V3 robots are pretty good with turning and and executing commands. The medium motor works nicely considering the weight of the bot itself and is able to move the bot quickly to the task at hand. The sound does get a bit annoying but supposedly there is a way to mute it. The display, although simple, becomes tedious especially when having to type names into it. On the other hand it is very easy to navigate through.

course outline

Course as is week 1-5 3d printing week 6 Engineering as a whole week 7-8 analytics week 9-12 LEGO week 13-14 Christmas lights week 15 ...